Siemens SINUMERIK 840D sl Operating Manual page 35

Procedure
To exclude a device from the export, proceed as follows:
1. In the Add-In directory, open the file with the extension
"Siemens.EplAddin.DQTopo.dll.eplan.config".
This file is always automatically generated when a configuration is saved.
2. After opening the file, search for the appropriate key in the "ConfigurableFilterFunctions"
tag.
Figure 5-20
3. Then set the Value of the appropriate Key to "true".
Figure 5-21 Example setting: Active filter for all-pole devices
EPLAN display type - key assignment
In the following table, the EPLAN display types have been assigned the appropriate keys:
All-pole
Overview
Pair cross-reference
Single-pole
RI process picture
External
Graphic
Mapping of EPLAN display type and the keys
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
Example setting
EPLAN display type
Configuring with EPLAN Add-In
5.6 Excluding devices from the export
Key
Circuit
Overview
PairCrossReference
CircuitSingleLine
ProcessAndInstrumentationDiagramm
External
Graphics
35