Drive-Cliq; Drive-Cliq Interface - Siemens Sinumerik 828D Manual

Interface description

6.6 DRIVE-CLiQ

6.6 DRIVE-CLiQ
6.6.1

DRIVE-CLiQ interface

Pin assignment at X100 - X102
PIN
1
2
3
4
5
6
7
8
A
B
Use
DRIVE-CLiQ interfaces are used to connect SINAMICS S120 components to the PPU.
The following rules apply:
● Topology rules for S120 Combi (Page 53)
● Topology rules for S120 Booksize (Page 55)
● Topology rules for Safety Integrated functions (Page 59)
● Topology example without Safety Integrated functions (Page 60)
● Topology example with Safety Integrated functions (Page 63)
DRIVE-CLiQ has the following properties:
● Components can be independently expanded
● Automatic detection of components by the PPU
● Standardized interfaces to all components
● Uniform diagnostics down to the components
● Complete service down to the components
84
Signal name Signal type
TXP O
TXN O
RXP I
-- --
-- --
RXN I
-- --
-- --
-- --
-- --
Meaning
Transmit data +
Transmit data -
Receive data +
Reserved
Reserved
Receive data -
Reserved
Reserved
Reserved
Reserved
Manual, 05/2015, 6FC5397-2DP40-3BA4
PPU and components