Charging The Battery; Battery Charge Level Display - Viavi 8000 V2 Platform User Manual

Chapter 3 Starting up

Charging the battery

Charging the
battery
Battery charge
level display
20
Use only the mains adapter supplied with the 8000 V2 Platform.
The adapter for some other electronic device may appear to be
identical, but entails a risk of damage to the 8000 V2 Platform.
On connection to the mains:
– if the user does not press
case, the Battery indicator on the front panel will be lit in red.
– when the user presses the
battery will charge during use (Battery indicator on the front panel in
solid red).
Once the battery is fully charged, the Battery indicator is lit in solid green
on the front panel.
When the Battery indicator on the front panel is blinking red, this mean
the power supply is not compatible with the battery used. Charge is
disabled.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
When the battery is installed in the instrument, a battery icon is displayed
in the top right-hand corner of the screen. Example:
When two batteries are set in the battery pack of the 8000 V2 Platform,
both battery icons are displayed on the upper banner, each one with its
charge level. Example:
Icon
– When the level becomes too low, the instrument emits a beep to
inform the user until it switches off automatically after saving the
current configuration and measurement.
User Manual 78100000202 Rev. 003
O
, the battery will start the charge. In this
N
O
key, the instrument starts up and the
N
.
Battery charge level
From 100% to 70%
From 70% to 40%
From 40% to 10%
From 10% to 0%
.