Configuring The Wifi Mode To Which The Platform Is Connected - Viavi 8000 V2 Platform User Manual

Chapter 12 WIFI Option

Configuring the WIFI mode to which the Platform is connected

Configuring the WIFI mode to which the Platform is connected
138
Once association of Platform with SSID is established, the icon
becomes to indicate the connection is active.
To work on WIFI with the Platform, configure the 802.11 or 802.11 IPV6
parameters on the Setup screen.
1 If 802.11 box is chosen, select the mode of connection:
Config 1 to 4
– Site Name
– IP Address
– IP Mask
– IP Gateway
– DNS
– Domain name
Dynamic
Note the IP address of the Platform, to be able to remote screen on PC
or to transfer files.
User Manual 78100000202 Rev. 003
static mode enabling input of the configuration of
4 sites. If this parameter is selected, the following
parameters must be entered:
the user can enter the name of the site in the Edit
menu.
IP address of the 8000 V2 Platform
address of the mask of the sub-network
IP address of the machine enabling access
outside the sub-network.
(Domain Name Server) IP address of the
machine providing the IP address on the basis of
the name
name of the local network to which the 8000 V2
Platform is connected.
in this mode, which requires a DHCP server, the
8000 V2 Platform requests an IP address from
this server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
8000 V2 Platform tries to establish a connection
to obtain an address from a DHCP server. If for
any reason, this process fails, the 8000 V2
Platform reverses to static IP address mode with
User1 IP address.