Code Management; Enrolling New Users - Securam ProLogic L01 Operation Instructions Manual

Table of Contents

Advertisement

ProLogic L01
PLEASE REPLACE THE BATTERY IMMEDIATELY. Operations, such as enrolling or deleting, are not
permitted with low battery condition.
Use one 9V alkaline battery. Manufacturer recommends to use Duracell
batteries.

3.0 Code Management

The ProLogic L01 comes with two default codes:
Super Code (ID00) is 111111
Manager Code (ID01) is 123456
It is strongly recommended that both these default codes are changed before the lock system is put into
service.
The ProLogic L01 has the capability to add one additional user code, in addition to the default codes.
ID00 is the Super Code – opens the lock, preforms programming and has the ability to turn on
Manager Mode. By default this code is preprogrammed as 1-1-1-1-1-1.
ID01 is the Manager Code – opens the lock and preforms programming functions. By default this
code is preprogrammed as 1-2-3-4-5-6.
ID02 is a User Code.

3.1 Enrolling New Users

Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press Menu/OK
Step 3: The display will prompt you to enter a valid Administrator code
Enter either the Super Code (ID00) or the Manager Code (ID01). The "Select Menu" message will be
displayed as follows:
Step 4: Scroll  to the menu selection "Enroll New User" and Press OK
Step 5: The following informational screens will appear:
Operation Instructions
TM
or Energizer® Alkaline
7

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProLogic L01 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF