Obfuscate Code Entry - Securam ProLogic L01 Operation Instructions Manual

ProLogic L01
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll  and  to the menu selection "Disable User" and Press OK
Step 5: The system will ask to confirm the deletion. Press OK.
Step 6: The system will verify the User has been disabled.

3.6 Obfuscate Code Entry

This feature would be used in order to obfuscate the code as it is entered on the LCD screen.
In normal operation, as the user enters the code, the digit of the code pressed is visible on the LCD until
the next digit is entered. The prior digit turns to an "*".
With the Obfuscate Code Entry feature, every digit that is entered is displayed as an "*" immediately
upon entry, so that your code is always obscured from view on the LCD.
To Obfuscate Code Entry, follow this procedure:
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press Menu/OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll  and  to the menu selection "Obfuscate Code Entry" and Press OK
Operation Instructions
11