Data Management; Encryption Key Set - Securam ProLogic L01 Operation Instructions Manual

ProLogic L01
Step 3: The display will prompt you to enter a valid code. Enter the Super Code (ID00). This
function is not available in the menu accessed by the Manager Code (ID01). The "Select Menu"
message will be displayed as follows:
Step 4: Scroll  to the menu selection "Disable Manager" and Press OK.
Manager Mode is now disabled. ID01 and ID02 functionality has been restored to original.

6.0 Data Management

As a security measure, all data that is transmitted between the EntryPad and lock is encrypted, such as
User codes, etc..

6.1 Encryption Key Set

The ProLogic L01 sends and receives data to the lock in an encrypted form. This is a security measure to
ensure that all data is protected. The Encryption Key is set during the manufacturing process with a
default encryption key value. This value can be changed using the Encryption Key Set menu selection.
**Note: If the Encryption Key is changed from the default setting, this value must be maintained, as it is
a vital element to communicate with the lock inside the safe.
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll  to the menu selection "Encryption Key Set" and Press OK.
Operation Instructions
14