Additional References For Copp - Cisco Nexus 9000 Series Configuration Manual

Configuring Control Plane Policing
Would you like to enter the basic configuration dialog (yes/no): yes
Do you want to enforce secure password standard (yes/no)[y]: <CR>
Create another login account (yes/no) [n]: n
Configure read-only SNMP community string (yes/no) [n]: n
Configure read-write SNMP community string (yes/no) [n]: n
Enter the switch name : <CR>
Enable license grace period? (yes/no) [n]: n
Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]: n
Configure the default gateway? (yes/no) [y]: n
Configure advanced IP options? (yes/no) [n]: <CR>
Enable the telnet service? (yes/no) [n]: y
Enable the ssh service? (yes/no) [y]: <CR>
Configure the ntp server? (yes/no) [n]: n
Configure default interface layer (L3/L2) [L3]: <CR>
Configure default switchport interface state (shut/noshut) [shut]: <CR>
Configure best practices CoPP profile (strict/moderate/lenient/dense/skip) [strict]:
strict
The following configuration will be applied:
password strength-check
no license grace-period
no telnet server enable
no system default switchport
system default switchport shutdown
policy-map type control-plane copp-system-p-policy
Would you like to edit the configuration? (yes/no) [n]: <CR>
Use this configuration and save it? (yes/no) [y]: y
switch#

Additional References for CoPP

This section provides additional information related to implementing CoPP.
Related Documents
Related Topic
Licensing
Type of ssh key you would like to generate (dsa/rsa) : <CR>
Document Title
Cisco NX-OS Licensing Guide
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Additional References for CoPP
491