Configuring The Ldap Dead-Time Interval - Cisco Nexus 9000 Series Configuration Manual

Configuring the LDAP Dead-Time Interval

Command or Action
minutes | password password [idle-time minutes] |
username name [password password [idle-time minutes]]]
Example:
switch(config)# ldap-server host 10.10.1.1 test
rootDN root1 username user1 password Ur2Gd2BH
idle-time 3
Step 3
[no] ldap-server deadtime minutes
Example:
switch(config)# ldap-server deadtime 5
Step 4
(Optional) show ldap-server
Example:
switch(config)# show ldap-server
Step 5
(Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Related Topics
Configuring the LDAP Dead-Time Interval
You can configure the dead-time interval for all LDAP servers. The dead-time interval specifies the time that
the Cisco NX-OS device waits, after declaring that an LDAP server is dead, before sending out a test packet
to determine if the server is now alive.
Note When the dead-time interval is 0 minutes, LDAP servers are not marked as dead even if they are not responding.
You can configure the dead-time interval per group.
Before you begin
Enable LDAP.
SUMMARY STEPS
1. configure terminal
2. [no] ldap-server deadtime minutes
3. (Optional) show ldap-server
4. (Optional) copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
120
LDAP Server Configuration
Enabling or Disabling LDAP, on page 110
Configuring LDAP Server Hosts, on page 111
Purpose
default value for the idle timer is 60 minutes, and the valid
range is from 1 to 1440 minutes.
Note We recommend that the user not be an existing
user in the LDAP server database.
Specifies the number of minutes before the Cisco NX-OS
device checks an LDAP server that was previously
unresponsive. The default value is 0 minutes, and the valid
range is from 1 to 60 minutes.
Displays the LDAP server configuration.
Copies the running configuration to the startup
configuration.
Process, on page 109
Configuring LDAP