Configuring The Global Source Interface For Radius Server Groups - Cisco Nexus 9000 Series Configuration Manual

Configuring the Global Source Interface for RADIUS Server Groups

Command or Action
switch(config-radius)# exit
switch(config)#
Step 8 (Optional) show radius-server groups [group-name]
Example:
switch(config)# show radius-server groups
Step 9
(Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Related Topics
Configuring the Global Source Interface for RADIUS Server Groups
You can configure a global source interface for RADIUS server groups to use when accessing RADIUS
servers. You can also configure a different source interface for a specific RADIUS server group. By default,
the Cisco NX-OS software uses any available interface.
SUMMARY STEPS
1. configure terminal
2. ip radius source-interface interface
3. exit
4. (Optional) show radius-server
5. (Optional) copy running-config startup config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)
Step 2
ip radius source-interface interface
Example:
switch(config)# ip radius source-interface mgmt 0
Step 3 exit
Example:
switch(config)# exit
switch#
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
50
Configuring the RADIUS Dead-Time
Purpose
Displays the RADIUS server group configuration.
Copies the running configuration to the startup
configuration.
Interval, on page 60
Purpose
Enters global configuration mode.
Configures the global source interface for all RADIUS
server groups configured on the device.
Exits configuration mode.
Configuring RADIUS