Configuring The Control Plane Service Policy - Cisco Nexus 9000 Series Configuration Manual

Configuring Control Plane Policing
Command or Action
Example:
switch(config)# show policy-map type control-plane
Step 10 (Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Related Topics

Configuring the Control Plane Service Policy

You can configure one or more policy maps for the CoPP service policy.
Note When you try to change the CoPP policy and apply a custom CoPP policy, it is configured in the hardware
as non-atomic, and the following system message appears:
This operation can cause disruption of control traffic. Proceed (y/n)?
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT24-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT23-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT21-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT25-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT26-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT22-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT4-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
Before you begin
Ensure that you have configured a control plane policy map.
SUMMARY STEPS
1. configure terminal
2. control-plane
3. [no] service-policy input policy-map-name
4. exit
5. (Optional) show running-config copp [all]
6. (Optional) copy running-config startup-config
Configuring a Control Plane Class
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Configuring the Control Plane Service Policy
Purpose
Copies the running configuration to the startup
configuration.
Map, on page 473
[no] y
477