Cisco Nexus 9000 Series Configuration Manual page 269

Configuring IP ACLs
Command or Action Purpose
• ing-l3-span-filter—Configures the size of the ingress
Layer 3 and VLAN SPAN filter TCAM region (Cisco
Nexus 9200 and 9300-EX switches only).
• ing-l3-vlan-qos—Configures the size of the ingress
Layer 3, VLAN, and SVI QoS TCAM region (Cisco
Nexus 9200 switches only).
• ing-netflow—Configures the size of the NetFlow
TCAM region.
• ing-racl—Configures the size of the IPv4 or IPv6
ingress router ACL (RACL) TCAM region (Cisco
Nexus 9200 switches only).
• ing-redirect—Configures the size of the redirect
TCAM region for DHCPv4 relay, DHCPv4 snooping,
and DHCPv4 client (Cisco Nexus 9200 switches only).
• ing-sup—Configures the size of the ingress supervisor
TCAM region (Cisco Nexus 9200 switches only).
• ipsg—Configures the size of the IP source guard
SMAC-IP binding TCAM region.
• ipv6-ifacl—Configures the size of the IPv6 port ACL
TCAM region.
• ipv6-l3qos—Configures the size of the IPv6 Layer 3
QoS TCAM region.
• ipv6-qos—Configures the size of the IPv6 port QoS
TCAM region.
• ipv6-racl—Configures the size of the IPv6 RACL
TCAM region.
• ipv6-vacl—Configures the size of the IPv6 VACL
TCAM region.
• ipv6-vqos—Configures the size of the IPv6 VLAN
QoS TCAM region.
• l3qos—Configures the size of the IPv4 Layer 3 QoS
TCAM region.
• l3qos-lite—Configures the size of the IPv4 Layer 3
QoS lite TCAM region.
• mac-ifacl—Configures the size of the MAC port ACL
TCAM region.
• mac-l3qos—Configures the size of the MAC Layer 3
QoS TCAM region.
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Configuring ACL TCAM Region Sizes
243