Licensing Requirements For Ip Acls - Cisco Nexus 9000 Series Configuration Manual

Licensing Requirements for IP ACLs

Feature Name
System-managed ACLs
vPC convergence
Note
Fabric extender (FEX)
Dynamic ARP inspection (DAI)
IP source guard (IPSG)
Multicast PIM Bidir
Static MPLS
Network address translation (NAT)
NetFlow
OpenFlow
sFlow
Supervisor modules
Related Topics
Licensing Requirements for IP ACLs
The following table shows the licensing requirements for this feature:
Product
Cisco
NX-OS
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
228
This region boosts the convergence times when a vPC
link goes down and traffic needs to be redirected to
the peer link.
Configuring ACL TCAM Region
Configuring TCAM Carving, on page 250
License Requirement
No license is required to use IP ACLs. Any feature not included in a license package is bundled
with the nx-os image and is provided at no extra charge to you. For an explanation of the
Cisco NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.
Region Name
system
Note
vpc-convergence
Note
fex-ifacl, fex-ipv6-ifacl, fex-ipv6-qos,
fex-mac-ifacl, fex-mac-qos, fex-qos,
fex-qos-lite
arp-ether
ipsg
mcast_bidir
mpls
nat
ing-netflow
openflow
sflow
egr-sup: Egress supervisor (Cisco Nexus
9200 Series switches only)
ing-sup: Ingress supervisor (Cisco Nexus
9200 Series switches only)
Sizes, on page 240
Configuring IP ACLs
The region size cannot be
changed.
Setting this region size to 0
might affect the convergence
times of vPC link failures.