Supermicro SuperWorkstation 5038A-I User Manual page 51

Connector Description
Audio FP Front Panel Audio Header
BT1 Onboard Battery
Fan 1,2,3,4,5 System/CPU Fan Headers (Fan1: CPU Fan)
JD1 Speaker/Buzzer Header
JF1 Front Control Panel Header
JPW1 24-pin ATX Main Power Connector
JPW2 +12V 4-pin CPU power Connector
JSD1 SATA DOM (Disk On Module) Power Connector
JSTBY1 Standby Power Header
I-SATA0~5 SATA 3.0 Ports (supports RAID 0, 1, 5 & 10)
S-SATA0~3 SATA 3.0 Ports (no RAID support)
USB 16/17 Front Panel Accessible USB 3.0 Headers
S4 Power Button
S11 BIOS Restore
S8 Clear CMOS Button
JPI2C1 Power Supply SMBbus I2C Header.
JTPM1 Trusted Platform Module Header
COM1 Serial Port Header
JIPMB1 System Management Bus Header (for IPMI only)
Jumper Description
JBT1 Clear CMOS
JI C1/JI C2 SMB to PCI Slots Enable/Disable
2 2
JPAC1 Audio Enable/Disable
JPL1/JPL2 LAN1/LAN2 Enable/Disable
JPME2 Intel Recovery Mode Enable/Disable
JWD1 Watch Dog
JBR1 BIOS Recovery Mode Enable/Disable
JPUSB1 USB Wake Up Enable/Disable
Chapter 5: Advanced Serverboard Setup
Default
See Section 5-9
Off (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 2-3 (Disabled)
Pins 2-3 (NMI)
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
5-13