Supermicro SuperWorkstation 5038A-I User Manual page 115

Hide thumbs Also See for SuperWorkstation 5038A-I:
Table of Contents

Advertisement

Chapter 7: BIOS
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will
be claimed by the EHCI driver. The settings are Enabled and Disabled.
XHCI Mode
This feature handles the operation mode for the XHCI (Extensible Host Controller
Interface) controller. The settings are Smart Auto, Auto, Enabled, and Disabledl.
EHCI1
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
Super IO Configuration
7-35

Advertisement

Table of Contents
loading

Table of Contents