Rider's Seat Removal - Triumph Speed Triple S Owner's Handbook Manual

To install the passenger seat:
• Position the rear of the passenger
seat to the rear locator in the rear
subframe.
3
1. Passenger seat
2. Rear locator
3. Seat lock hook
• Locate the seat lock hook into the
lock plate assembly and press down
to engage it in the lock. An audible
click can be heard when the seat is
correctly engaged in the lock.
Warning
To prevent detachment of the seat
during riding, after fitting always grasp
the seat and pull firmly upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an acci-
dent.
1
2
General Information

Rider's Seat Removal

Note:
• The passenger seat must be re-
moved before attempting to remove
the rider's seat.
To detach the rider's seat:
• Remove the passenger seat as de-
scribed on page 70.
• A tool is located at the rear of the
passenger seat. Using the tool, re-
move the two fixings securing the
rider's seat to the lock plate.
1 2
1. Rider's seat
2. Fixings
• Slide the seat rearwards and lift
the rear of the seat.
• Disengage the locators from the
frame, and the front bracket from
below the fuel tank hinge.
2
71