The bar end mirrors will be set by your
authorised Triumph dealer and will not
normally require any adjustment. Should
adjustment be necessary, do not rotate
the mirror beyond 75°, measured from
the vertical section of the mirror arm.
75°
1.
Mirror arm vertical section
1
Steering/Wheel Bearings
Warning
To prevent risk of injury from the mo-
torcycle falling during the inspection,
make sure that the motorcycle is stabi-
lised
and
secured
support.
Do not exert extreme force against
each wheel or rock each wheel vigor-
ously as this may cause the motorcycle
to become unstable and cause injury
by falling from its support.
Make sure that the position of the sup-
port block will not cause damage to the
motorcycle.
Steering Inspection
Warning
Riding the motorcycle with incorrectly
adjusted or defective steering (head-
stock) bearings is dangerous and may
cause loss of motorcycle control and
an accident.
Maintenance
on
a
suitable
117