Smart Keyless System Approval Addendum
Smart Key Battery
Replacement
Warning
There is a risk of explosion if an incor-
rect battery is used.
Always make sure that the correct bat-
tery size and type is used.
Warning
Batteries contain harmful materials.
Always keep batteries out of the reach
of infants and young children to pre-
vent them being swallowed.
If swallowed, consult a doctor immedi-
ately.
To replace the smart key battery:
• Make sure that the smart key is in
passive mode (red LED).
• Remove the battery cover fixing
using a 1.5 mm AF Allen key.
• Remove the battery cover.
• Remove the battery, noting its ori-
entation.
• Insert a new 3 Volt CR2032 Lithium
battery.
• Replace the battery cover making
sure that it aligns correctly.
• Refit the battery cover fixing and
tighten to 0.3 Nm.
Battery Disposal
The used battery must be handed to a
recycling agent who will make sure that
the dangerous substances from which
the battery is manufactured do not pol-
lute the environment.
161