Daytime Running Lights (Drl) (If Fitted) - Triumph Speed Triple S Owner's Handbook Manual

Maintenance
• Disconnect the multi-pin connector
from the headlight bulb.
1
3
1. Headlight assembly
2. Headlight bulb
3. Multi-pin connector
• Detach the wire retainer from its
clip (do not remove the screw) then
remove the bulb from the light unit.
1
2
1. Wire retainer
2. Screw
3. Headlight bulb
• Installation is the reverse of the re-
moval procedure.
140
2
3
Warning
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
Caution
When reconnecting the battery, con-
nect the positive (red) lead first.
• Reconnect the battery, positive
(red) lead first.
• Refit the front panel and tighten
the fixings to 2 Nm.
Daytime Running Lights (DRL)
(if fitted)
The daytime running lights are situated
within the headlight assembly and are
sealed, maintenance free LED units.