Triumph Speed Triple S Owner's Handbook Manual page 42

General Information
Trip Setup - Manual Reset
Manual reset of the trip meters will only
reset the selected trip meter when the
rider chooses to do so.
To set the trip meter to reset manually:
• Push the HOME button to display
the MAIN MENU.
• Push the joystick down and then
press the joystick centre to select
TRIP SETUP.
• Push the joystick down and then
press the joystick centre to select
TRIP 1 RESET or TRIP 2 RESET.
• Push the joystick centre to select
MANUAL.
There are two options:
– RESET NOW AND CONTINUE -
Resets all trip meter data in
the relevant trip meter, and
the trip meter will only reset
when manually done so by the
rider.
– CONTINUE WITHOUT RESET -
The trip meter will not be
reset. The trip meter will only
reset when manually done so
by the rider.
• Press the joystick centre to confirm
the selection and return to the pre-
vious menu.
42
Trip Setup - Automatic Reset
Automatic reset will reset each trip me-
ter after the ignition has been switched
off for a set time.
To set the trip meters to reset automat-
ically:
• Push the HOME button to display
the MAIN MENU.
• Push the joystick down and then
press the joystick centre to select
TRIP SETUP.
• Push the joystick down/up and
then press the joystick centre to
select TRIP 1 RESET or TRIP 2 RE-
SET.
• Push the joystick down/up and se-
lect AUTOMATIC and then press the
joystick centre.
• Push the joystick down/up to select
the timer setting and press the joy-
stick centre to confirm the required
time limit. The required time limit is
then stored in the trip memory.
When the ignition is turned off, the trip
meter is set to zero when the time peri-
od has elapsed.