Table of Contents
Advertisement
Mounting the Horizontal Shift Lath
What has to be
To allow horizontal shift adjustment of the filter, a lath has to be mounted on the cross
done
lath.
Necessary Tools
A flatblade screwdriver for M3 (No 5.5)
Mounting the
To mount the shift lath, follow the next procedure:
shift lath
Illustrations
BARCO ——————————————————— 9
Step
Action
1
Place the horizontal shift lath (A) on the front side of the
cross lath, lining up the threaded studs with the slots in the
cross lath.
2
Secure the position of the lath with the 2 screws (B). Don’t
tighten the screws too hard because a horizontal adjust-
ment of the polarizer has still to be done.
A
Image 1
Image 2
B
A
————————————— Projection Systems
Image
1&2
1&2
Advertisement
Table of Contents
