Advertisement
F
Start First Print
1
2
0.15mm
3
Further
Closer
N-Series
Even though N2/N2 Plus is prelev-
eled in the factory, please press X/Y
axis 'home' button first and then Z
axis 'home' button to check whether
the leveling is changed during
shipping.
If you choose to increase the Raft
base for printing, the optimal
distance between the left and right
nozzle and the printing platform is
0.15mm (main nozzle) and 0.25mm
respectively. If you don't choose to
0.25mm
use the Raft base, the distance
between the nozzle and the print
platform is determined by the layer
thickness set in the slicing tempate.
NOTE:
main nozzle in this tutorial. If you want to
make right nozzle as the main nozzle or
use the both nozzles to print at the same
time, the above parameters should be set
again.
The distance between the nozzle and
the printing platform can be adjusted
by turning the thumb screw on the
left-front corner of the Z-plate, the
higher the screw stands out, the
further the distance between the
nozzle to the printing platform gets.
/ Quick Start Guide
3D Printer
The left nozzle is default as the
Advertisement
