Sonicwall Soho3 And Tele3 Front Panel - SonicWALL PRO 200 Installation Manual

• Power Input
Connects to the external power supply that is provided with the SonicWALL PRO 100. The
use of an Uninterruptible Power Supply (UPS) is recommended to protect the SonicWALL
PRO 100 against damage or loss of data due to electrical storms, power failures, or power
surges.
• Cooling Vents
• The SonicWALL PRO 100 is convection cooled; an internal fan is not necessary. Do not
block the cooling vents.

SonicWALL SOHO3 and TELE3 Front Panel

The SonicWALL SOHO3 front panel is shown below, followed by a description of each item.
The SonicWALL TELE3 is identical to the SonicWALL SOHO3 except for the TELE3 label on
the front panel and the inclusion of SonicWALL VPN.
SonicWALL SOHO3 and SonicWALL TELE3 Front Panel Description
• Power
Lights up when power is applied to the SonicWALL SOHO3 or SonicWALL TELE3.
• Test
Lights up when the SonicWALL is first powered up and performing diagnostic tests to check
for proper operation. These tests take about 90 seconds. If the Test LED remains lit after
this time, the software is corrupt and must be reinstalled.
Power LED
WAN Port LEDs
Link, 100, Activity
Test LED
LAN Port LEDs
Link, 100, Activity
SonicWALL Installation Guide Page 71