Introduction; Inspecting The Package - SonicWALL PRO 200 Installation Manual

1

Introduction

This Installation Guide covers initial installation instructions for all SonicWALL Internet Security
appliances. The instructions are the same for all SonicWALL models.
The Installation Guide assumes that you have a working knowledge of the Internet and
networks. If you are unfamiliar with networking and networking terminology, read Basic
Network Terminology and Configuration, see "Basic Networking Terminology" on
page 44, as a starting point for your installation.

Inspecting the Package

The following items should be included in the package:
• One SonicWALL Internet Security Appliance
• One power supply (not included with International SonicWALL PRO 200 or PRO 300)
• One Category 5 Ethernet crossover cable (labeled "Crossover")
• One Category 5 Ethernet standard cable
• One SonicWALL Installation Guide
• One Companion CD
• One SonicWALL Internet Security Appliance User's Guide
If an item is missing from the package, you can contact SonicWALL, Inc. by phone at
(408) 752-7819 or submit a Web Support Form at <http://techsupport.sonicwall.com/
swtech.html>.
Here are a few helpful guidelines for installing the SonicWALL appliance.
• The WAN Ethernet port should be connected to the Internet router or modem.
• The LAN Ethernet port should be connected directly to your PC, or a network hub, or a
switch on the internal, protected network.
• The DMZ Ethernet port, included with the SonicWALL PRO 100, the SonicWALL PRO 200
and the SonicWALL PRO 300, should be connected to publicly accessible servers, such as
Web and Mail servers.
• A crossover cable should be used when connecting the SonicWALL directly to another
computer or router.
• A standard Ethernet cable should be used when connecting the SonicWALL to a
network hub, switch, or modem.
Note In some cases, you may need to switch the crossover cable with the standard cable.
:
Switching cables will not damage your system.
SonicWALL Installation Guide Page 15