Table of Contents
Advertisement
There are three Ethernet ports; one for each of the LAN, DMZ, and WAN ports:
•
Link
Lights up when a Twisted Pair connection is made to another Ethernet device (usually a
hub) on the port. Note that the device connected to the SonicWALL must support the
standard Link Integrity test.
•
Activity
Lights up when the SonicWALL transmits or receives a packet through the Twisted Pair port
onto the network.
SonicWALL PRO 200 and PRO 300 Back Panel
The SonicWALL PRO 200 back panel is shown below, followed by a description of each item.
The SonicWALL PRO 300 back panel is identical to the SonicWALL PRO 200.
Cooling
Vents
10Mbps/100Mbps
LAN Ethernet Port
SonicWALL PRO 200 and SonicWALL PRO 300 Back Panel Description
•
(3) Twisted Pair (10Base-T, 100Base-T) Ethernet Ports
(3) Auto switching 10Mbps/100Mbps Ethernet ports provide connectivity for both Ethernet
and Fast Ethernet networks. The Ethernet ports connect the SonicWALL to the LAN, DMZ,
and WAN using Twisted Pair cable with RJ45 connectors.
•
Serial
DB-9 RS-232 Serial port
•
Reset Switch
Resets the SonicWALL PRO 200 or the SonicWALL PRO 300 to its factory clean state. This
can be required if you forget the administrator password, or the SonicWALL firmware has
become corrupt.
Page 68
RS-232
Serial Port
10Mbps/100Mbps
WAN Ethernet Port
DMZ Ethernet Port
Reset
Switch
10Mbps/100Mbps
5VDC, 2A
Power Input
Hide quick links:
Advertisement
Table of Contents
