Table of Contents
Advertisement
4
Hardware Description
This chapter provides detailed illustrations and descriptions of the SonicWALL Internet Security
Appliances front and back panels by model. Refer to this chapter to learn the location of LEDs,
switches, and connectors.
SonicWALL PRO 200 and PRO 300 Front Panel
The SonicWALL PRO 200 front panel is shown below, followed by a description of each item.
The SonicWALL PRO 300 is identical to the SonicWALL PRO 200 except for the PRO 300 label
on the front panel and has 64MB of RAM.
SonicWALL PRO 200 and SonicWALL PRO 300 Front Panel Description
•
Power
Lights up when power is applied to SonicWALL PRO or SonicWALL PRO 300.
•
Test
Lights up when the SonicWALL is powered up and performing diagnostic tests to check for
proper operation. These tests take about 90 seconds. If the Test LED remains lit after this
time, the software is corrupt and must be reinstalled.
•
Alarm
Lights up and flashes for 10 seconds when an event generates an alert. Alarm LED flashes
for 10 seconds. Alert events are defined in the Log Settings section in Chapter 5 of the
SonicWALL Internet Security Appliance User's Guide.
Power, Test, and
WAN Port LEDs
Link, Activity
Alarm LEDs
LAN Port LEDs
Link, Activity
DMZ Port LEDs
Link, Activity
SonicWALL Installation Guide Page 67
Hide quick links:
Advertisement
Table of Contents
