The Use Network Address Translation (NAT) window verifies that the SonicWALL has a
registered IP address.
Selecting NAT Enabled Mode
If you selected Assigned you two or more static IP Addresses, the Optional-Network
Address Translation window is displayed.
7. The Optional-Network Address Translation (NAT) window offers the ability to enable
NAT. Select Don't Use NAT if there are enough static IP addresses for your SonicWALL,
all PCs, and all network devices on your LAN. Selecting Don't Use NAT enables the
Standard mode. Select Use NAT if valid IP addresses are in short supply or to hide all
devices on your LAN behind the SonicWALL valid IP address. Click Next to continue.
Configuring WAN Network Settings
If you selected either NAT or Standard mode, the Getting to the Internet window is
displayed.
8. Enter the IP address provided by your ISP in the SonicWALL WAN IP Address, WAN/
DMZ Subnet Mask, WAN Gateway (Router) Address, and DNS Server Addresses.
Click Next to continue.
Page 28