Spartherm Mini R1V51 Installation Instructions Manual page 39

11. TECHNICAL DATA, CLASSIC
Nominal heat output kW (closed operation)
Thermal output range kW
Efficiency %
Required chimney diameter (mm)
General data Flue gas connection: Ø mm
Possible flue gas connection Ø mm
Weight (approx.) kg
Required minimum cross-section for supply and recirculating air (with WLM) cm
Required minimum cross-section for recirculating and supply air (without WLM) cm
non-self-closing combustion chamber door (Design A)
self-closing combustion chamber door (Design A1)
Operation with open door
Testing and values
BlmSchV [Ordinance in the Implementation of the Federal Immission Control Act] 1st level
BlmSchV [Ordinance in the Implementation of the Federal Immission Control Act] 2nd level
15a BVG
Mass flow of flue gas g/s
Operation with Flue gas temperature °C (on the flue gas outlet)
closed combustion Required supply pressure: in Pa
chamber (multiple CO %
2
Required diameter after M-FeuVo. cm
allocation permitted)
Combustion air requirement m³/h
Mass flow of flue gas g/s
Triple value for the
Flue gas temperature at the insert connecting piece °C
chimney calculation Required supply pressure Pa
CO %
when connecting to
2
downstream lines Fuel amount kg/h
Combustion air requirement m³/h
Mass flow of flue gas g/s
Operation with open
Flue gas temperature °C
fireplace (multiple
Flue gas temperature behind the NSHF °C
allocation not
Combustion air requirement m
permitted)
Required supply pressure: in Pa
Heating chamber to the heating chamber wall cm
distance To the setup floor cm
Heat insulation
Setup floor cm
(example rock wool Mounting wall cm
matting to AGI-Q Side wall cm
132) Primary walling for wall that must be protected cm
Setup floor cm
Heat insulation Mounting wall cm
(example calcium Side wall cm
silicate according to Primary walling for wall that must be protected cm
EN 13501-2)
as a replacement for the front-mounted masonry and thermal insulation for the mounting wall cm
as a replacement for the front-mounted masonry and thermal insulation for the side wall cm
Changes and mistakes reserved
* Fulfils 15a 2015 only with AT hand piece, attention: flue gas connection + 160 mm
H2O with NSHF
14.0 / water side 9.0
2
2
Outflow to the side: 340 (166 behind NSHF)
/h
3
GB 39
Nova E Nova Renova
F - Air with A H2O with
NSHF NSHF
10.1
13.4 / water side 6.9
9.8-18,2 7.1-13,1 9.4-17,4
> 80 > 80 > 80
180 180 180
180 180 180
- 150 150
290 195 200
- - -
370/450 1580/1900 690/830
- - -
  
- - -
  
  
  
12.7 9.2 12.8
Outflow top: 193 396
355
(165 behind NSHF)
12 12 12
8.2 8.1 7.7
15 15 15
46.3 34.1 47.3
25 26 25
520 600 480
14 15 12
~ 9 ~ 9 ~ 9
10 8 8
103 77 82
- - -
- - -
- - -
- - -
- - -
6 6 6
0 0 0
0 0 0
10 13 12
10 13 12
6 6 6
0 0 0
8 10 9
8 10 9
6 6 6
10 13 12
10 13 12
Renova Renova C - Air Renova C - Air
B - Air with with NSHF with NSHF
NSHF (wood logs) (lignite)
8.8 8.5 7.8
6.2-11,4 6.0-11,1 5.5-10,1
> 80 > 80 > 80
180 160 160
180 160 160
150 150/180 150/180
140 105 110
- - -
1060/1280 1030/1240 1030/1240
- - -
  
- - -
  
  
  
9.4 8.2 9.1
495 483
357
(142 behind NSHF) (142 behind NSHF)
12 12 12
7.0 7.7 7.1
15 15 15
34.7 30.3 30.3
25 20 20
590 650 650
15 15 15
~ 9 ~ 9 ~ 9
7 4 4
68 41 41
- - -
- - -
- - -
- - -
- - -
10 10 10
0 0 0
0 0 0
13 15 15
13 15 15
6 6 6
0 0 0
10 12 12
10 12 12
6 6 6
13 15 15
13 15 15
*** Values were not available at the time of printing.
*** Deviating insulation guidelines apply for GET fireplace inserts.
This can be obtained from the separate GET manual.
GB