Thermo Scientific EVOS M5000 User Manual page 15

Connect the
instrument
EVOS M5000 User Guide
™
3. Secure the UV light shield mount to the top of the condenser light shield using
the two screws supplied with the UV shield assembly (not the protruding
screws on the mount).
4. Clip the condenser light shield with the attached UV light shield mount back
onto the condenser head.
5. Peel the protective paper from the UV light shield, then slide the orange UV
light shield over the two protruding screws on light shield mount to attach it
to the instrument.
Note: The UV light shield is provided as a safety feature and should be installed
whenever the unit is in operation. The UV light shield is removable for access to
the condenser sliders used in transmitted light mode. Simply unhook it from the
screws on the UV light shield mount.
1. Confirm that the power switch is OFF (located on the back; see page 7).
2. Connect the USB receiver for the wireless mouse and keyboard to an
available USB-A 2.0 port (page 7).
3. Connect the power adaptor and power cord. Ensure a tight connection
4. Plug the power adaptor into the power input port on the instrument (page 7).
5. Plug the power cord into a power outlet and check for the light on the power
supply.
13