Service Overview; Board Location; Removing/Reattaching The Lens - Sony Ipela ExwavePRO SNC-CS20 Service Manual

1-1. Board Location

Board name
BI-227
BI-228
CN-3107
PS-757
PS-757A
SY-365
SY-365A

1-2. Removing/Reattaching the Lens

Removal
1. Remove the screw.
2. Disconnect the lens connector cover in the direction of
the arrow 1, then remove the lens connector.
3. Reattach the lens connector cover to the original
position with the screw.
4. Remove the two hooks, then remove the plug adapter.
(SNC-CS20 only)
5. Rotate the lens in the direction of the arrow 2, then
remove it in the direction of the arrow 3.
Installation
6. Attach the lens in the reverse order of steps 4 and 5.
7. Attach the lens connector to the LENS terminal.
SNC-CS20/CM120
Section 1

Service Overview

Model
SNC-CM120
SNC-CS20
Common use
SNC-CS20
SNC-CM120
SNC-CS20
SNC-CM120
SY-365/365A board
BI-227/228 board
LENS terminal
2
3
Lens
CN-3107 board
PS-757/757A board
Lens connector cover
Plug adapter
(SNC-CS20 only)
1
Hooks
Lens connector
B2 x 6
1-1