Using The Brbk-Mf1 Hd Optical Multiplex Card And The Hfbk-Ts1 Hdv Interface Board To Input Audio And Video Signals Simultaneouly To The Hdv Video Equipment - Sony BRC-Z700 Operating Instructions Manual

Using the BRBK-MF1 HD Optical Multiplex Card and the HFBK-TS1 HDV
Interface Board to Input Audio and Video Signals Simultaneouly to the HDV
Video Equipment
This system allows you:
• To operate the camera remotely from a distance up to 1,000m (3,281 feet)
• To perform pan/tilt and zoom operations using the joystick
• To transmit the video signal and control signal of the camera, and the audio signal input to the BRBK-MF1 Optical
Multiplex Card to a distant place using the Optical Fiber Cable
• To output the audio signal transmitted via the Optical Fiber Cable as an audio signal conforming to HDV standards
from the HFBK-TS1 through the AUDIO OUT jacks on the BRU-H700 if you insert the HFBK-TS1 HDV Interface
Board into the BRU-H700
• To input the video signal of the camera and the audio signal via the HFBK-TS1 HDV Interface Board simultaneously
to the HDV video equipment
System configuration
BRC-Z700
BRBK-MF1 HD Optical
Multiplex Card
Video signal
Audio line signal
Remote control (VISCA) signal
,
Signal flow
Notes
• The video signal delay in this system is caused by signal processing in the HFBK-TS1 HDV Interface Board. If you
are uncomfortable with the delay, output the video signal via the RGB/COMPONENT connector on the BRU-H700.
• You cannot operate pan/tilt and zoom with HDV video equipment connected to the i.LINK (HDV) OUT connector
on the HFBK-TS1 HDV Interface Board. Use the VISCA RS-232C or VISCA RS-422 connectors instead.
• Use AUDIO DELAY in the HDV menu of the camera to compensate for the delay between the video signal of the
camera and the audio signal input to the HFBK-TS1 HDV Interface Board (see page 41). The delay is adjustable by
STEP (approx. 24 mS).
Microphone
Microphone
amplifier
CCFC-M100HG
Optical Fiber Cable
HD video monitor
HFBK-TS1 HDV
Interface Board
RM-BR300 Remote Control Unit
HDV VTR equipped
with the i.Link
connector
i.Link cable
i.Link (HDV)
R L
AUDIO IN AUDIO OUT
HFBK-TS1
L
R
FUNCTION
~
AC IN
1 6
VISCA RS-422
CAMERA IN EXT SYNC OUT RGB/COMPONENT IN VISCA RS-232C OUT
BRU-H700 HD
Optical Multiplex
Unit (rear)
System Configuration
17