Radio Setup - Simrad RS90S User Manual

16
Hi
DSC
MENU SELECT
PRI
LOCAL/DIST
CONTRAST
GPS/DATA
RADIO SETU
USA
16
Hi
DSC

RADIO SETUP

PRI
UIC
CH NAME
RING VOLUME
KEY BEEP
USA
16
Hi
DSC
UIC
PRI
USA
INT L
CANADA
USA
16
Hi
DSC
MENU SELECT
PRI
LOCAL/DIST
CONTRAST
GPS/DATA
RADIO SETU
USA
16
Hi
DSC
RADIO SETUP
PRI
UIC
A
CH NAME
RING VOLUME
KEY BEEP
USA
16
Lo
Hi
DSC
CH NAME PRI
PORT OPS
USA
16
Hi
DSC
PORT OPS
PRI
EDIT
DELETE
USA
88 |
Radio setup
UIC
US and AUS models only.
This option allows you to switch between USA, International, or
Canadian channel banks. The selected channel bank is displayed
on the LCD along with the last used channel. For details of channel
banks, see "Appendix 7 - Channel charts" on page 119.
Select MENU → RADIO SETUP → UIC.
1.
2.
Select the desired channel bank then press [OK].
Editing channel names
If a channel has been assigned a name, the name appears next to
the channel number on the standby screen. You can edit or delete
the channel names.
A list of default channel names is given in "Appendix 7 - Channel
charts" on page 119.
1. Select MENU → RADIO SETUP → CH NAME.
Use ▲ and ▼ to scroll to the one you want to change then press
2.
[OK].
3.
Select EDIT.
4.
Enter the new name over the existing one.
5.
Press [OK] repeatedly if necessary to display the YES/NO
confirmation.
6.
Scroll to YES or NO as required and press [OK].
To delete a channel name:
Use a similar procedure to the above, but select DELETE at step 3.
Setup | RS90S User Manual