Using The Hailer - Simrad RS90S User Manual

16
Hi
DSC
C
HAILER
PRI
HAILER
FOG HORN
INTERCOM
ANNOUNCE
USA
16
Hi
DSC
HAILER
PRI
OUTPUT
VOL
LO HI
USA
16
Hi
DSC
DSC
HAILER
PRI
LISTEN
USA
32 |
Tri watch scan
(US models only)
Tri watch monitors the current working channel, Channel 16 and
Channel 9.
For tri watch, you need to enable both channel 16 and channel 9 as
priority channels. See "Setting the priority channel" on page 90.
To enter tri watch scan:
•
Short press [SCAN].
The TRI icon will be displayed on screen.
To exit tri watch scan:
•
Press [SCAN] or [X].

Using the hailer

If the RS90S is connected to a suitable public address (PA) speaker,
you can use the Hailer function to hail other vessels or deck crew.
The Hailer function also features a listen-back mode, which uses the
PA speaker as a microphone to listen for a response.
1.
Press and hold [AIS/IC] until the HAILER menu appears.
2.
Select HAILER.
3.
Press [PTT] to talk.
4.
Release [PTT] to listen for a response.
5.
When finished, press [X] to exit Hailer mode.
¼ Notes:
•
While pressing [PTT], you can change the volume of the PA speaker
using the volume control on the side of the handset.
•
Hailer mode is only available on the wired handsets.
Operating procedures | RS90S User Manual