Simrad RS90S User Manual page 58

16
L
Hi
DSC
C
D
INDIVIDUAL
PRI
ROUTINE FROM
SUNBIRD
NO AUTO SW
01:15
U A S
SILENC
S C N
16
Hi
DSC
C
INDIVIDUAL
PRI
ROUTINE FROM
SUNBIRD
NO AUTO SW
01:15
NEW-CH ABLE
16
Hi
DSC
C
ROUTINE FROM
PRI
SUNBIRD
NO AUTO SW
CH09 REQUEST
01:15
U A S
NEW-CH ABLE
I S C
08
Lo
DSC
C
INDIV ACK
CHANGE CHAN
SET CHANNEL
USA
ABLE
58 |
•
Do nothing to allow the radio to automatically switch after 10
seconds, or
•
Press [X] to cancel the automatic switch and remain on the
current channel.
4.
When needed, press [PTT] to talk on the selected working channel.
AUTO ACK
(For Individual calls with INDIV REPLY set to Auto)
When the radio sounds the incoming DSC call alert:
1.
Press the [SILENC] softkey to silence the alert.
2.
To see more details about the call, including the requested channel,
press ▲ or ▼ .
3.
You can then use one of the following three softkeys:
•
[ABLE]
Acknowledge the call on the requested channel.
The radio will send the acknowledge signal and change to the
designated channel.
•
[NEW-CH]
Acknowledge the call, but request a different channel:
• Press ▲ or ▼ to reach the channel you want to use, and then
press the [ABLE] softkey.
The radio will send a request for your preferred channel.
¼ Note:
AUTO ACK is not allowed in some EU countries.
•
[UNABLE]
Acknowledges the call, but signals that you are unable to use the
requested channel. Note: this option is not available for ROUTINE
calls. If INDIV REPLY is set to AUTO, the radio will automatically
send an acknowledgement to the caller if there is no user
intervention within 10 seconds.
•
When needed, press [PTT] to talk on the selected working
channel.
Receiving a DSC distress call
See "DSC Distress calls" on page 42.
DSC procedures | RS90S User Manual