7-2 KL155
LOADER REMOVAL
CAUTION
• Never park loader without bucket attached to the loader.
• Never allow weight of tractor to be put on parking leg
when removing loader.
(1) Pin Hand
(2) Stand
STEP 1.
Park the tractor and loader on hard level surface.
STEP 2.
Raise the boom until the bucket is about 2 feet off the ground.
STEP 3.
Set the parking legs with pivot pin and Keeper.
STEP 4.
Lower the boom until the Parking legs make contact on
the ground. Tip the bucket until the bucket cutting edge
touch the ground.