Kioti KL155 Manual page 32

(A) Forward-Float Low (B) Left-Bucket Retract
(C) Right-Bucket Dump (D) Rear-Raise
The Single lever joystick control lever is mounts on the
KL155 From the factory.
T h e c o n t r o l l e v e r h a s t h e s a f e t y l o c k f u n c t i o n .
Lock the control lever when leaving the tractor while the
Bucket is in the air.
The loader hydraulic valve lift Cylinder circuit incorporates
a "float" position which allows the loader bucket to follow
ground contours. The "float" position is engaged by shifting
the control lever forward into "detent" until the operator pulls
t h e c o n t r o l l e v e r o u t o f t h e " D e t e n t " p o s i t i o n .
Refer to "Scraping" operation for recommended use
of "float" position.
The control valve has a neutral position that prevents
movement of loader or bucket.
When the control valve is released from the work position,
the spool will return to neutral.
IMPORTANT
• Contaminates in hydraulic oil can cause valve spools
to stick. Be alert when operating loader and follow your
Tractor Operator's Manual maintenance schedule.
LOADER OPERATION 6-5
6