Martin Exterior Projection 500 User Manual page 54

Control and Programming
Control systems ....................................................................................................... DMX, RDM
DMX channels ......................................................................................................................... 13
Interface ......................................................................... Control panel with backlit LCD display
Control resolution .................................. 8-bit DMX control of each color; 16-bit DMX control of
DMX compliance ............................................................................................ USITT DMX512-A
RDM compliance ........................................................................................... ANSI/ESTA E1.20
Optics
Light source ................................................................................ 230 W white light LED engine
CRI (Color Rendering Index) .................................................................................................. 72
Color temperature ............................................................................................ 8300 K (±200 K)
LED lifetime ............................................................... 20 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions
Photometric Data
Model
Narrow
Medium
Wide
Very Wide
Construction
Housing ............................................................................................................... Cast aluminum
Color ............................................................................. Hard anodized, metallic grey lacquered
Front glass ............................................... 5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress protection .............................................................................................................. IP 66
Corrosion resistance ..................................... C5-M (very high corrosivity / marine, ISO 12944)
Impact resistance ................................... IK08 (with control panel display cover plate installed)
EPA (Effective Projected Area) ...................................................................................... 0.15 m2
RoHS compliant
Gobos
Recommended material .............. Borosilicate glass, coatings heat-resistant to 450°C (842° F)
Alternative material ........... Aluminum 1060, paint on front lens side, 450° C (842° F) HT paint
Gobo diameter ....................................................... 30 mm, +0/-0.2 mm (1.18 in., +0/-0.008 in.)
Max. image diameter ....................................................................................... 23 mm (0.91 in.)
Glass gobo thickness, minimum ........................................ 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, maximum ..................................... 3.0 mm ±0.3 mm (0.12in. ±0.012 in.)
Aluminum gobo thickness ............................................ 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)
Color filters
Suitable material ......................... Borosilicate glass, coatings heat-resistant to 450°C (842° F)
Gobo thickness ............................. 1.1-3.0 mm -0.1/+0.3 mm (0.045-0.115 in. -004/+0.012 in.)
Installation
Orientation ............................................................................................................................ Any
Mounting ........................................................................................................... Adjustable yoke
Minimum distance from housing to combustible materials .................................... 0.1 m (4 ins.)
Minimum distance from front glass to illuminated surfaces .................................. 0.5 m (1.6 ft.)
Suitable for wet locations. Do not immerse in water.
54
intensity, focus and gobo rotation / indexing angle
Cut-off angle
12°
22°
37°
51°
Exterior Projection 500 User Manual
Total output Center peak
5000 lumens 203 000 cd
6100 lumens 77 000 cd
5700 lumens 28 000 cd
3400 lumens 11 000 cd