Surveillance.errortable.errorentry.errorpending; Surveillance.errortable.errorentry.erroracknowledge; Surveillance.numberofpowerlines; Surveillance.powerlinetable - DEV 2190 User Manual

User Manual DEV 2190
5.5.4.4.4.5

.surveillance.errorTable.errorEntry.errorPending

OID:
Syntax:
Access:
Description:
5.5.4.4.4.6

.surveillance.errorTable.errorEntry.errorAcknowledge

OID:
Syntax:
Access:
Description:

5.5.4.4.5 .surveillance.numberOfPowerLines

OID:
Syntax:
Access:
Description:
Note:

This value is used to determine the maximum index of the following table:

5.5.4.4.6 .surveillance.powerLineTable

With the .powerLineTable the status of each power line can be checked.
5.5.4.4.6.1

.surveillance.powerLineTable.powerLineEntry.powerLineIndex

OID:
Syntax:
Access:
Description:
5.5.4.4.6.2

.surveillance.powerLineTable.powerLineEntry.powerLineStatus

OID:
Syntax:
Access:
Description:
.1.3.6.1.4.1.21035.41.3.4.1.5.x
INTEGER {pending (1), gone (2)}
read-only
The last occurrence of the error is
"1" still pending, or
"2" not pending anymore, i.e. gone.
.1.3.6.1.4.1.21035.41.3.4.1.6.x
INTEGER {notAcknowledged (1), acknowledged (2)}
read-only
The last occurrence of the error is
"1" not acknowledged, or
"2" acknowledged.
.1.3.6.1.4.1.21035.41.3.5.0
INTEGER32
read-only
The number of power lines. This type of device supports
monitoring for the two power lines, thus "2" is returned.
.1.3.6.1.4.1.21035.41.3.6.1.1.x
INTEGER32 (1..3)
not-accessible
A unique value for each table entry ranging between "1" and the
number of entries (defined by .numberOfPowerLines, please refer
to chapter 5.5.4.4.5).
.1.3.6.1.4.1.21035.41.3.6.1.2.x
INTEGER {ok (1), notok (2), notapplicable (3)}
read-only
The status of the related power line, possible values:
"1" ok: no errors are reported for the power line;
"2" not ok: an error was detected for the power line;
"3" not applicable: is not returned for this type of device.
 Copyright DEV Systemtechnik GmbH 2009-2017
89