Application; Application.controlmode - DEV 2190 User Manual

User Manual DEV 2190
5.5.4.3

.application

5.5.4.3.1 .application.controlMode

OID:
Syntax:
Access:
Description:
Note:

The value "3" (Auto Mode) is available for devices with installed redundancy
switching functionality, only.

Via the SNMP setup of the Web Interface (please refer to chapter 5.4.7.2.2)
.controlMode can be set to read-write (default) or to read-only.

The factory setting is "2" (Remote Mode).
.1.3.6.1.4.1.21035.41.2.1.0
INTEGER {local (1), remote (2), auto (3)}
read-write OR read-only
The device operation mode (chapter 5.1), possible values:
"1" Local Mode: local operation at the device or via Web I/F;
"2" Remote Mode: remote operation via SNMP;
"3" Auto Mode: autonomous switching.
 Copyright DEV Systemtechnik GmbH 2009-2017
73