Display - NTT docomo Arrows Me F-11D Instruction Manual

Display

◆ Setting Lock screen
❖
Setting lock screen display
Set whether to display the lock screen.
From the Home screen, m→[Settings]
1
→[Display]→Mark/Unmark [Lock screen
enable]
❖
Lock screen timeout
From the Home screen, m→[Settings]
1
→[Display]→[Lock screen timeout]→Select
a time
❖
Setting image on the lock screen
From the Home screen, m→[Settings]
1
→[Display]→[Photo Screen]
2
[Picture settings]→Set each item
･
When you select [Flickr]/[Picasa], images matching
a keyword are obtained automatically and
displayed in slideshow. If selected, set [Update
interval] and [Network to be used].
･
If [Specified time] is selected for [Update interval],
select [Update time] to specify time.
✔INFORMATION
･
Time set in [Specified time] is the time to start acquiring
images. It is not the time to display images.
◆ Setting screen
❖
Setting screen brightness
From the Home screen, m→[Settings]
1
→[Display]→[Brightness]
2
Slide the slider to adjust brightness→[OK]
･
To adjust brightness automatically according to the
environment, mark [Automatic brightness] and
slide the slider to adjust brightness.
❖
Setting screen timeout
From the Home screen, m→[Settings]
1
→[Display]→[Sleep/Lit when held]→
[Sleep]→Select a time
❖
Keep lit when held
Set whether to keep the screen backlight on while holding
the terminal in hand.
From the Home screen, m→[Settings]
1
→[Display]→[Sleep/Lit when held]
2
Mark/Unmark [Keep lit when held]
･
If [Lock soon when flat] is marked, when the
terminal is held in horizontally, the screen turns off
in approximately 5 seconds regardless of set time in
[Sleep].
❖
Setting battery icon
From the Home screen, m→[Settings]
1
→[Display]→[Battery icon]→Select an icon
66
Settings