NTT docomo Arrows Me F-11D Instruction Manual page 50

1
From the Application menu, [Phone]→[Dial]
→Enter an emergency number
Police call : 110
Fire and emergency rescue : 119
Marine emergency : 118
2
✔INFORMATION
･
If the docomo mini UIM card is not inserted in Japan,
emergency calls 110, 119 and 118 cannot be made on the
PIN code entry screen. or during PIN code lock/PUK lock.
･
If you dial 110, 119, or 118 overseas, an emergency call
screen may appear but the call is normally sent.
◆ Showing/Hiding caller ID at each
call
You can specify whether to show your phone number
(caller ID) on the other party's mobile terminal when you
make a call.
･
Your caller ID is important personal information. So,
take care when notifying people about it.
1
From the Application menu, [Phone]→[Dial]
→Enter a phone number→m→[Caller
ID notification]→[Notify]/[Not notify]→
✔INFORMATION
･
You can set to show/hide caller ID all at once in "Caller ID
notification".→P51
◆ Entering touch-tone signals
Enter a pause (;) following phone number to send touch-
tone signals. Touch-tone is used for services such as
listening to messages on your home answering machine,
ticket reservations and bank balance inquiries.
1
From the Application menu, [Phone]→[Dial]
→Enter a phone number→m→[Add
wait]→Enter touch-tone signals
･
Enter "0" to "9", "*" and "#".
･
Alternatively, enter a phone number→m→Tap
[Add 2-sec pause] to enter pause (,). If (,) is entered,
touch-tone signals are automatically sent 2 seconds
later.
･
When sending multiple messages, separate each
message with a pause delimiter.
2
→When a call is made, [Send]
✔INFORMATION
･
For details on sending touch-tone signals during a call,
see "Operation during a call". →P49
48
Calling