NTT docomo Arrows Me F-11D Instruction Manual page 65

✔INFORMATION
･
The system requirements of a PC for USB tethering are as
follows. Operations on upgraded OS or added/modified
environment are not guaranteed.
- Windows XP (Service Pack 3 or later), Windows Vista
and Windows 7
･
To perform USB tethering with Windows XP, install
dedicated driver to a PC. For download information of the
dedicated driver, refer to the following website.
http://www.fmworld.net/product/phone/usb/ (in
Japanese only)
❖
Wi-Fi tethering
You can allow Wi-Fi devices to access the Internet by using
the terminal as Wi-Fi hotspot.
･
You can connect up to 8 Wi-Fi devices.
･
1 - 13 channel frequency bands can be used in Japan,
and 1 - 11 channel frequency bands overseas.
❖
Setting Wi-Fi tethering
Set Wi-Fi tethering to ON for connection setting.
･
By default, [WPA/WPA2 PSK] is set for Security and
random characters are set for [Password]. Make the
security setting as required.
From the Home screen, m→[Settings]
1
→[More...]→[Tethering]
2
Mark [Wi-Fi tethering]
3
Check the precautions and [OK]
4
[Network SSID]→Enter a network SSID
･
By default, "F-11D_AP" is set.
･
When changing registered setting, select
[Configure Wi-Fi hotspot] to display the setting
screen.
5
[Security]→Select a security
･
Security can be set to [Open], [WEP64], [WEP128],
[WPA PSK TKIP], [WPA PSK AES], [WPA2 PSK AES]
or [WPA/WPA2 PSK].
6
[Password]→Enter a password→[Save]
❖
Simple registration of Wi-Fi device
Register Wi-Fi device supporting AOSS or WPS.
･
Set Wi-Fi tethering to ON in advance.
From the Home screen, m→[Settings]
1
→[More...]→[Tethering]→[Easy Wi-Fi
registration]
2
Select a registration method
AOSS system :
button on the Wi-Fi device
WPS system : [WPS system]→[Push button system]/
[PIN entry system]→Set required items→On the
registration screen, [OK]
･
In case of push button method, press a dedicated
button on an access point. In case of PIN entry
method, enter PIN code displayed on the Wi-Fi
device and tap [OK].
✔INFORMATION
･
When number of AOSS registration devices exceeds
24, a confirmation screen for deleting old registration
appears. To use AOSS connection with new device, tap
[Yes].
･
To cancel AOSS setting, on the [Configure Wi-Fi
hotspot] screen, tap [AOSS OFF].
･
For some Wi-Fi devices, AOSS connection may not be
established. If connection is failed, use WPS connection
or connect manually.
63
[AOSS system]→Press AOSS
Settings