NTT docomo Arrows Me F-11D Instruction Manual page 133

● Calls are not connected (Even when moving, 圏外
(out of service area) does not disappear or although
radio waves are enough, making/receiving calls is
unavailable).
•
Reattach the docomo mini UIM card.→P23
• Reattach the battery pack.→P25
•
Turn the terminal OFF and ON.→P29
•
Due to the nature of radio waves, making/receiving
calls may be unavailable even when 4 signal status
icons appear on the display. Move to call again.
•
Have you changed network type?→P124
•
Due to the crossing of radio waves, at the crowded
public places, calls/mails are crossed and the
connection status may not be good. In this case,
"Please wait for a while" appears and the caller
hears a busy tone. Move to other place or call again
at other time.
● The ringtone does not sound.
•
Check the ringtone volume.→P65
•
Have you activated any of the following functions?
- Public mode (Drive mode)→P51
- Airplane mode→P61
- Manner mode→P64
•
Have you set any of the following settings to 0 sec.?
- Ring time of Voice mail service→P51
- Ring time of Call forwarding service→P51
● Calls cannot be made.
•
Is the docomo mini UIM card installed in the right
direction?→P23
•
Do you enter a phone number from City code?
•
Do you set Airplane mode?→P61
■ Mail
● The notification icon indicating new mail does not
appear.
•
Have you changed any of the following settings?
- Notification in Settings for Messaging→P84
- Email notifications in Settings for Email→P87
■ 1Seg/Camera
● Cannot watch 1Seg.
•
Are you out of ground-based digital broadcasting
service area or in an area with poor signal strength?
•
Are you set channels?→P105
● Photos and videos taken with the camera are
blurred.
•
Check if clouds or dirt attach to the lens of camera.
•
Use [Auto] of Scene mode.→P108
•
You can also focus using the following functions.→
P108, 109
- Focus mode
- Touch focus
•
When shooting an object nearby, switch Focus
mode to [Macro].→P108, 109
■ Osaifu-Keitai
● Osaifu-Keitai function is unavailable.
•
When removing the battery pack, Osaifu-Keitai
functions are unavailable regardless of the Osaifu-
Keitai lock settings.
• Is Osaifu-Keitai lock activated?→P100
•
Do you place
reader?→P100
131
mark of the terminal over IC card
Appendix/Index