Ducati Monster 1200S Owner's Manual page 68

Selecting the Riding Mode
Press CONFIRM MENU button (4) to enter the menu
for selecting the Riding Mode (A). The instrument
panel displays the speed indication (on the right) and
riding mode name (on the left):
- SPORT
- TOURING
- URBAN
One of these will be highlighted to indicate that it was
the last memorized setting and is currently in use.
Attention
It is not possible to open the menu for selecting
the riding mode, if button (4) is in the position for
activating the turn indicators (to the left or right).
For the highlighted Riding Mode some of the
parameter settings are displayed:
- ABS: the ABS text followed by the level of
calibration set (1, 2, 3) in case the ABS is active or
by OFF in case the ABS is disabled.
- DTC: the DTC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7 , 8) in case the
DTC is active or by OFF in case the DTC is
disabled;
- DWC: the DWC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7 , 8) in case the
DWC is active or by OFF in case the DWC is
disabled;
- engine power (ENGINE): ENG lettering followed
by set engine power: HIGH, MED or LOW.
- if the DQS is present: the DQS indication
followed by the set calibration level ("UP",
"DOWN", "UP/DOWN" or "OFF").
The displayed information are the settings stored in
every single Riding Mode. The stored settings may be
the factory ones (Ducati default settings) or the ones
customized by the owner. Any time the CONFIRM
MENU button (4) is pressed, you highlight a riding
mode and the associated parameters are displayed
(A, .
Once the desired riding mode is highlighted, confirm
the selection by holding down the CONFIRM MENU
button (4) for 2 seconds: the new riding mode
selection is saved and the standard screen is
displayed (B, .
67