Ducati Monster 1200S Owner's Manual page 139

When you open the function, the currently set DWC
level or status is shown on the left. Customization
options are listed on the middle: levels from 1 to 8 and
status OFF .
Use buttons (1) and (2) to select the new desired
intervention level or the "OFF" indication and press
button (4) to confirm and highlight "MEMORY".
If you do not want to memorize the selected level,
press button (1) or (2) once to toggle to the previous or
next box, thus removing the amber highlighting from
the "MEMORY" box.
To save the new setting, hold button (4) for two
seconds while the message "MEMORY" is
highlighted in orange, it will change to
"MEMORIZED" and become green.
If storage is successful, the "MEMORY" box returns
to its initial status (not highlighted and with MEMORY
indication), the set level or status will be refreshed
and then "EXIT" will be highlighted in green.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
go back to the previous menu level and it will be
possible to start the "Parameter storage" procedure.
If the DTC is disabled (set to OFF), the DWC
parameter cannot be changed and is forced to level
138
OFF and therefore the relevant setting menu is not
available.