Lever (1) disengages the clutch. It features a dial
adjuster (2) for lever distance from the twistgrip on
The lever distance can be adjusted through 10 clicks
of the dial (2). Turn clockwise to increase lever
distance from the twistgrip. Turn the adjuster
counterclockwise to decrease lever distance.
When the clutch lever (1) is operated, drive from the
engine to the gearbox and the drive wheel is
disengaged. Using the clutch properly is essential to
smooth riding, especially when moving off.
Set clutch lever when motorcycle is stopped.
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
The engine can be started with the side stand
down and the gearbox in neutral. If starting with a
gear engaged, pull in the clutch lever (in this case the
side stand must be up).