Brakes - Ducati Monster 1200S Owner's Manual

Brakes

Separate-action anti-lock brake system operated by
hall-type sensors mounted to each wheel with phonic
wheel detection: ABS can be disabled.
Front
Type: with drilled steel disk. No. 2 disks.
Disk diameter: 12.6 in (320 mm) (Monster 1200 S).
Disk diameter: 13 in (330 mm) (Monster 1200 S).
Disk thickness: 0.17 in (4.5 mm) (Monster 1200).
Disk thickness: 0.2 in (5 mm) (Monster 1200 S).
Hydraulically operated by a control lever on handlebar
right hand side.
Monoblock brake calipers with separate pistons.
Brake caliper (M4.32): 1.26 in (32 mm) cylinder
diameter (Monster 1200).
Brake caliper (M4.30): 1.18 in (30 mm) cylinder
diameter (Monster 1200 S).
Friction material: Toshiba TT2182FF .
Cylinder diameter (PR 18/21): 0.71 in (18 mm)
(Monster 1200).
Cylinder diameter (PR 16/21): 0.63 in (16 mm)
(Monster 1200 S).
Braking surface: 16.05 cu. in (263 sq. cm) (Monster
1200).
322
Braking surface: 16.14 cu. in (264.5 sq. cm) (Monster
1200).
Rear
Type: with fixed drilled steel disk.
Disk diameter: 9.65 in (245 mm).
Disk thickness: 0.2 in (5 mm)
Hydraulically operated by a pedal on RH side.
Brake caliper: 1.34 in (34 mm) cylinder diameter.
Make and type: Brembo P 34
Friction material: Toshiba TT2172 HH.
Cylinder type: PS 11.
Cylinder Ø: 0.43 in (11 mm).
Braking surface: 12.75 cu. in (209 sq. cm).
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with generous quantities of
running water.