When you open the function, the currently set DTC
level or status is shown on the left (e.g.: DTC 3).
Customization options are listed on the middle: levels
from 1 to 8 and status OFF .
Select the parameter to be customized (DTC) by
pressing button (1) or (2).
Once desired parameter is highlighted, press
CONFIRM MENU button (4).
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange.
If new settings have been saved, MEMORIZED will
be shown in green for one second, the set level or
status will be refreshed (refresh is indicated with the
color green) and then EXIT will be highlighted in
green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
135