Ducati Monster 1200S Owner's Manual page 133

When you open the function, the currently set ABS
level or status is shown on the left (e.g.: ABS 1).
Customization options are listed on the middle: levels
from 1 to 3 and status OFF .
Press buttons (1) and (2) to highlight the levels one by
one: in particular, use button (1) to highlight the
following item and button (2) to highlight the previous
item.
Once desired level is selected, press CONFIRM
MENU button (4) to highlight MEMORY item.
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange. If new settings have been saved,
MEMORIZED will be shown in green for one second,
the set level or status will be refreshed (refresh is
indicated with the color green) and then EXIT will be
highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
132
Note
When you enable or disable the ABS through
this function, i.e. toggling from disabled to enabled
system or vice-versa, the procedure for activating or
deactivating the ABS is carried out: the change of
status of the ABS control unit is not instantaneous.