Brakes - Ducati DIAVEL V4 2024 Owner's Manual

Brakes

Front brake
Semi-floating drilled twin-disc.
Brake calliper: Stylema M4 30 monobloc with radial
mount and 4 pistons, Bosch Cornering ABS.
Brake calliper make: BREMBO.
Calliper piston diameter: 30 mm (1.18 in).
Number of pistons per calliper: 4.
Disc diameter: 330 mm (12.99 in).
Disc thickness: 5 mm (0.19 in).
Disc thickness shall not be below the following value
at max wear conditions: 4.5 mm (0.17 in).
Disc braking surface: 303.6 cm
Disc braking surface material: stainless steel.
Plate carrier material: aluminium, painted black.
Hydraulically operated by a control lever on
handlebar right-hand side.
Brake lever adjustment: with screw.
Brake lever type: radial and adjustable.
Friction material make: TOSHIBA.
Friction material: BRM 10 A HH.
Brake master cylinder type: PR16/19.
Brake lever master cylinder diameter: 16 mm (0.62
in).
3 3
(18.52 in ).
Rear brake
With fixed drilled stainless steel disc.
Brake calliper: floating calliper with 2 pistons [ABS
Cornering].
Brake calliper make: BREMBO.
Calliper piston diameter: 30 mm/32 mm (1.18/1.25 in).
Disc diameter: 265 mm (10.43 in).
Disc thickness: 6 mm (0.23 in).
Disc thickness shall not be below the following value
at max wear conditions: 5.5 mm (0.21 in).
Disc braking surface: 240.4 cm
Hydraulically operated by a pedal on RH side.
Friction material make: TOSHIBA.
Friction material: TT 2182 FF.
Brake master cylinder type: PS13.
Brake lever master cylinder diameter: 13 mm (0.51
in).
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
3 3
(14.67 in ).
301